Black & Decker CHV1410L32 Mode D'emploi page 7

Replacement filters are available from your
BLACK+DECKER dealer.
Visit www.blackanddecker.com to locate
dealers.
• Remove the old filters as described
above.
• Fit the new filters as described above.
Maintenance
Bowls and filters can be washed thoroughly;
however, use only mild soap and a damp
cloth to clean the main part of the vacuum.
IMPORTANT: To assure product SAFETY
and RELIABILITY, repairs, maintenance
and adjustment (other than those listed
in this manual) should be performed
by authorized service centers or other
qualified service personnel, always using
identical replacement parts.
Troubleshooting
If the product does not work, check the
following:
• The charge indicator light is flashing
when unit is connected to charger.
• The charger was correctly plugged in
for recharge. (It feels slightly warm to the
touch.)
• The charger cord is not damaged and is
correctly attached.
• The charger is plugged into a working
electrical outlet.
• The switch is in the "OFF" position when
charging.
For assistance with your product, visit our
website www.blackanddecker.com for the
location of the service center nearest you
or call the BLACK+DECKER help line at
1-800-544-6986.
Accessories
Recommended accessories for use with
your product are available from your local
dealer or authorized service center. If you
need assistance regarding accessories,
please call: 1-800-544-6986.
• Filter accessory number VF110.
WARNING:
any accessory not recommended for use
with this product could be hazardous.
Battery Removal and Disposal
This product uses Lithium Ion rechargeable
and recyclable batteries. When the
batteries no longer hold a charge, they
should be removed from the Vac and
recycled. They must not be incinerated or
composted.
The batteries can be taken for disposal to
a BLACK+DECKER, Company-Owned or
Authorized Service Center. Some local
retailers are also participating in a national
recycling program (see "RBRC™ Seal").
Call your local retailer for details. If you
bring the batteries to a BLACK+DECKER
Company-Owned or Authorized Service
Center, the Center will arrange to recycle
old batteries. Or, contact your local
municipality for proper disposal instructions
in your city/town.
To remove the battery pack for disposal:
1.) First, before attempting to disassemble
2.) Using a phillips screwdriver, remove
3.) Lift the housing cover away from the
4.) Detach all lead connections from
5.) Remove battery pack and dispose of as
The RBRC ® Seal
The RBRC ® (Rechargeable Battery Recycling Corp­
oration)
Seal on the nickel cadmium, nickel metal hydride or
lithium­ionbatteries (or battery packs) indicates that
the costs to recycle these batteries (or battery packs)
at the end of their useful life have already been paid
by BLACK+DECKER. In some areas, it is illegal to
place spent nickel cadmium, nickel metal hydride
or lithium­ion batteries in the trash or municipal
solid waste stream and the Call 2 Recycle ® program
provides an environmentally conscious alternative.
Call 2 Recycle, Inc., in cooperation with
BLACK+DECKER and other battery users, has
established the program in the United States
and Canada to facilitate the collection of spent
nickel cadmium, nickel metal hydride or lithium­
ion batteries. Help protect our environment and
conserve natural resources by returning the spent
nickel cadmium, nickel metal hydride or lithium­ion
batteries to an authorized BLACK+DECKER service
center or to your local retailer for recycling. You
The use of
may also contact your local recycling center for
information on where to drop off the spent battery.
RBRC ® is a registered trademark of Call 2 Recycle, Inc.
Service Information
All BLACK+DECKER Service Centers
are staffed with trained personnel to
provide customers with efficient and
reliable power tool service. Whether you
need technical advice, repair, or genuine
factory replacement parts, contact the
BLACK+DECKER location nearest you. To
find your local service location, call: 1-800-
544-6986 or visit
www.blackanddecker.com
7
the product, turn it on and leave it
on until the motor completely stops
insuring a complete discharge of the
batteries.
the seven screws securing the two
housing halves.
assembly.
battery pack.
per recommended guidelines.