Publicité
Les langues disponibles
Les langues disponibles
leaving approximately 8-9 inches
(203mm - 227mm) excess as shown.
A
• Figure C - Hang the vac on the wall by
placing the opening on the base of the
vac over the hooks in the wall mount
bracket as shown in figure C.
C
• Figure D - Insert the jack plug into the
charging socket.
D
Charging the battery (CHV1410L32)
WARNING:
only with the supplied charger.
From new, the rechargeable cells of the
product need a minimum charge time of 4
hours to ensure full power.
The charge is complete when the charging
indicator light will turn off. The charger can
be left connected indefinitely. The LED will
illuminate (charging) when the charger
occasionally tops off the battery charge.
• The switch must be in the off ("O")
position, the product will not charge if it is
in any other position.
• Figure E - Plug the jack plug of the
charger into the charging socket of the
tool. Plug the charger into any standard
120 Volt 60 Hz electrical outlet. The
B
charging indicator LED will illuminate.
While charging, the charger may get
warm, this is perfectly normal and safe. It
is safe to leave the appliance connected
to the charger indefinitely. The charger
automatically reduces power consumption
when charging is complete.
charge the battery at ambient
temperatures below 39°F (4°C) or above
104°F (40°C).
Charging the battery (CHV1410)
WARNING:
charge the battery at ambient temperatures
below 39°F (4°C) or above 104°F (40°C).
The charge is complete when the charging
indicator lights will turn off. The charger can
be left connected indefinitely.
• Place the appliance on the charging base
as shown.
• Plug in the charger. The charging
indicator will illuminate.
• Leave the appliance to charge.
For use
While charging, the charger may get warm,
this is perfectly normal and safe. It can
remain on charge indefinitely without damage
or danger. It is not possible to "overcharge"
the battery cells with the charger provided.
4
E
WARNING:
F
Do not
Do not
Publicité
