Graco SnugRide Classic Connect 22 Mode D'emploi

www.gracobaby.com
To Remove Existing Harness Tongues and Buckle and Attach Replacement Buckle
1
To loosen straps, lift
harness tightener and
pull harness straps out.
4
Unbuckle harness
red button, and
7
Re-attach chest clip.
MAKE sure not to
twist straps.
Turn page over to
finish the rest of
the assembly
Steps 10 to 15
for the buckle
replacement.
SnugRide® Classic Connect™ 22 Rear Adjust
Buckle Replacement Guide
5
by tilting top of
buckle down,
press top of
pull tongues
out of buckle.
8
Re-insert straps through slots
in seat pad and seat back.
See carseat owner's manual
for proper height setting for
your child.
2
Pull harness straps
through seat back and
seat pad.
6
Remove and
discard tongues.
9
Re-insert straps back into the tightener
and cross the tails through the belt path as
©2014 Graco PD265294B 1/14
3
Remove chest clip.
DO NOT DISCARD
the chest clip.
Slide NEW buckle
onto harness straps.
MAKE sure not to
twist straps.
shown.