Publicité
Les langues disponibles
Les langues disponibles
03 Temp.
04 Time
05 Digital Graphic
Display
06 Eco Dry
07 Damp Alert
08 Anti Static
DV7650T(SEM)_DC68-03784H-00_EN.indd 35
Temperature can only be adjusted in TIME DRY cycle. Press to
change the temperature of the current cycle. You can select from
5 different options. Please select the appropriate temperature
depending on the items in the load.
• High: For sturdy cottons or those labeled Tumble Dry.
• Medium: For permanent press, synthetics, lightweight cottons,
or items labeled Tumble Dry Medium.
• Med Low: For heat lower than Medium. Use to dry synthetic or
washable knit fabrics.
• Low: For heat sensitive items labeled Tumble Dry Low or
Tumble Dry Warm.
• Extra Low: Provides the lowest heated drying temperature
possible.
Press to adjust the drying time for the Manual Dry cycles. This
is not available with the Sensor Dry cycles because the dryer
determines the drying time by sensing the current moisture level
of the load.
Displays all cycle information, including the cycle time,
information code, and operating status.
This function is available with NORMAL and TIME DRY.
With the Eco Dry activated, drying takes a longer time but the
power consumption is reduced.
The drying time can be extended by up to 3 times depending on
the temperature and load. The Eco Dry function is enabled by
default.
This alert is available for all Sensor Dry cycles except for
ACTIVEWEAR. Available dry levels are Normal, More, and Very.
If a load contains mixed fabrics, the Damp Alert indicator blinks
when average dryness of the items in the load is 80 % dry. This
lets you take items that you don't want fully dried or that dry
quickly out of the dryer early while letting others continue to dry.
Reduces static electricity that occurs from clothing friction. This is
done by spraying steam in a later stage of the drying cycle.
NOTE
The Anti Static function is only available with NORMAL, HEAVY
DUTY, PERM PRESS, DELICATES, and TIME DRY.
English 35
2019-11-26
12:25:58
Publicité
