Renkforce Leser 7 Notice D'emploi page 56

• For the transponder reader to work independently with the transponder, user and time
scheme data set by you, finally transfer all data to the transponder reader.
Select the item „Reader" in the left menu. Right-click the desired reader in the right
area of the software and select „Write all data".
Depending on the scope of data, the data transfer may take some time.
You may need to switch the transponder reader to „Online" before the trans-
mission.
• To read the results (e.g. when precisely a specific transponder has been read), first
switch the transponder reader to „Online"; then click „Reader" in the left menu and
select the respective device.
Then click „Get events". The software will then download all events from the trans-
ponder reader. Depending on the data volume, this process may take some time.
56