Therabody THERAGUN MINI Mode D'emploi page 5

Using the Theragun mini
1. To turn on the Theragun mini, firmly press and hold the multi-functional
power/speed button on the right side of the device.
2. Float the device across areas in need of treatment, gradually applying light to
moderate pressure as needed.
3. Press the power/speed button again to toggle between 3 speeds.
4. To turn off the Theragun mini, firmly press and hold the power/speed button
until the device shuts off.
Connecting the attachments
1. Ensure that your device is powered off before connecting
or removing any attachments.
2. Align the attachment with the tip of the arm and push to
connect.
3. To remove the attachment, hold the top of the device with
one hand, and the attachment with the other hand. Place
one finger on each side of the plastic connector and firmly
pull off the attachment.
Warning: Do not place your finger between the attachment
and the end of the arm, as this may cause pinching or injury.
EN
5