Publicité
Les langues disponibles
Les langues disponibles
CLEANING THE GRINDING MECHANISM
Remove the power plug.
●
Remove the coffee bean container as described in the chapter titled "Cleaning".
●
PUSH
Turn the grinding ring to the
●
right as far as possible.
Clean the lower and upper grinding mechanism with the brush enclosed.
●
PUSH
After cleaning, rst of all
●
place the grinding ring
back on to the motor block
(arrow pointing to arrow).
Note: In order to test whether the grinding mechanism has been set in correctly, turn the grin-
ding ring to "coarse", such as level 20, and try to pull out the grinding mechanism by the metal
ring. If the grinding mechanism cannot be removed, it has been installed correctly.
Place the coffee bean container on the unit.
●
TIPS
Precise recommendations for grinding degree settings cannot be provided due to various
●
factors.
Beans / types of beans react differently (oily, old, freshly ground etcetera).
●
24
PUSH
Press the "PUSH" button,
●
and continue to the grin-
ding ring to the right.
Now place the upper
●
grinding mechanism.
PUSH
When the two arrows
●
point at each other
exactly, you can remove
the grinding ring together
with the upper grinding
mechanism. Remove the
upper grinding mecha-
nism from the grinding
ring.
PUSH
Turn the grinding ring
●
clockwise to the reques-
ted grinding degree
Publicité
