Diamond AD1B/L Manuel D'installation, D'utilisation Et D'entretien page 34

5.4. Recommendations for Use
Load Disposition
Prolonged Inactivity
If the appliance remains inactive for a long period,
proceed as follows:
1. Use the automatic disconnecting switch to
deactivate connection to the main electrical
line.
2. Clean the appliance and surrounding areas
thoroughly;
3. Spread a thin layer of cooking oil onto the
stainless steel surfaces;
4. Carry out all maintenance operations;
5. Leave the doors ajar to prevent the formation
of mould and/or unpleasant odours.
Recommendations for normal use
In order to ensure correct use of the appliance, it
is advisable to apply
recommendations:
 Do not obstruct the front and rear zones
above the condensing unit in order to favour
 Always keep the front of the condenser clean
 Check the planarity of the appliance rest
 Do not introduce liquid or solid substances at
 Do not stack the materials to be preserved in
the following
 Limit the number of times and the duration of
11
ENGLISH
!
ATTENTION !!
The incorrect stowing of the
products to be preserved can
generate appliance
malfunctioning
heat disposal from the condenser to a
maximum.
using a soft brush and do not use rigid or
metal tools that may damage the condenser
fins.
surface.
temperatures above
temperature and, however, introduce the
material after the appliance has reached the
functioning temperature.
contact with the internal walls, so blocking the
circulation of air, which guarantees uniformity
of the internal temperature of the refrigerated
compartment.
time the doors are open to a maximum.
the environmental
GB