Publicité
Les langues disponibles
Les langues disponibles
ASSEMBLY
Be sure to follow the assembly in-
CAUTION
structions for the appropriate
chest/cabinet. Do not use power tools to as-
semble chest/cabinet. Tighten bolts with hand
wrenches.
Tools Required (Not Included)
Phillips
Safety
screwdriver
goggles
Hardware Included
NOTE: Items not shown in actual size. Hardware
lengths are approximate.
Hardware
Item
AA
BB
CC
DD
EE
FF
GG
HH
II
JJ
Item
6" Swivel caster
10 mm
Wrench
Description
Bolt M6 x 16L
Steel washer
19 x 8.5 x 2
Bolt M8 x 12L
Screw M4 x 12L
Screw M6 x 12L
Screw M4 x 16L
Nut M6
Shoulder bolt
M6 x 8L
Nylon washer
19 x 8.5 x 1.5
Screw M6 x 16L
Description
Side handle
Tool hanger
with brake
6" Rigid caster
Bracket
13 mm
Wrench
Quantity
10
16
16
20
NOTE: Begin product assembly close to the final
8
intended location of your chest/cabinet. This product
is heavy and may be difficult to move after assembly.
20
Attach the side handle to the rolling cabinet using
four bolts (AA). The side handle can be attached to
2
either side of the rolling cabinet.
NOTE: The holes in the cabinet are tapped and do
not require nuts.
2
2
2
Quantity
1
1
2
CAUTION
2
Do not overtighten the screws.
1. Ensure all cabinet drawers are securely locked into
place using the key lock on the rolling cabinet.
2. Lay the rolling cabinet on its back. Use the packag-
2
ing material to protect the finish.
4
Shelf hinge bracket
Front bumper
Rear bumper
Chest corner extrusion
Cabinet corner extrusion
Cord storage bracket
Utility hook
Paper towel
holder bracket
Paper towel holder rod
Bottle opener
Attaching the Side Handle
Installing the Casters
Two people may be required to
complete installation.
2
8
2
2
2
4
2
2
1
1
AA
Publicité
