Publicité
Les langues disponibles
Les langues disponibles
ELECTRICAL PRUNING SHEAR
•
Use sleeve to fix the wire of device avoid wire be draw by branch, that's
will cause risk in working.
•
Don't use the device in rain or humidity environment.
•
During storage of the device after use, take off wire from battery and
pruning, shut up power switch before storage.
CAUTION
Please check battery charge level or blade sharpening when cutting
is difficult or not smooth.
15. MAINTENANCE & CLEANING
Tools to be repaired must be sent to Customer Assistance Service. Use
original part keeps the tool good condition and safe.
Switch off the battery power and disconnect the tool before to check,
maintain and repair the pruning shear, to avoid risk of unexpected
actuating of the tool.
Please wear glove before you check the blade sharp or not, that's
avoid blade hurt you.
•
Check the pruning shear frequently, this will keep tool safe and reliable.
•
Don't flush the tools or put it in water, it will cause short circuit or damage
the device.
•
Keep ventilation, motor and handle cleaning, always use feather clean the
device. Don't use cleanser flush device, it will rust parts.
•
Clean the blade after every use, protect by oil or spray protection.
•
After continuous work for 8 hours, please open the front cover of the
equipment and clean up wood chips and other impurities.
www.gruposanz.es
71
Publicité
