Hamilton Beach Mix'n Chill HAM-HMD900T-CE Manuel D'utilisation page 4

Mixer Safety
Unpacking
Carefully remove the mixer from the packaging and
take out all boxes or packets containing attachments
or specific items. Check that all of the parts have been
Installation
Position the mixer on a sturdy level surface and in
an open, well-lighted environment that provides easy
access to all controls, front and side. We recommend
Noise Level
The equivalent continuous sound level when the mixer
is operating on no-load is less than 70dB(A).
Connection
Observe all electrical governing codes and ordinances.
A 220–240V ac only, 50–60 Hz, 15-amp, fused
electrical supply is required. (A time-delay fuse
Maintenance
Check the agitator daily for wear or damage.
Replace the agitator every 90 days.
4
– SAVE THESE IN STRUC TIONS –
delivered, that the mixer operates as intended, and that
nothing has been damaged in transit. Contact the mixer
supplier to remedy any findings.
that you position the mixer so that the working height
of the agitator and controls are appropriate for the
intended operator(s).
is recommended.) It is recommended that a separate
circuit serving only this appliance be provided.