Télécharger Imprimer la page

NEFF B1CCC0A0 Serie Notice D'utilisation page 153

Publicité

1Operating the appliance
I n this section, you can find out how to set the
O p e r a t i n g t h e a p p l i a n c e
hotplates. The table shows heat settings and cooking
times for various meals.
Switching the hob on and off
The main switch is used to switch the hob on and off.
To switch on: touch the
The display light above the main switch and the
indicators light up. The hob is ready for use.
To switch off: Touch the
above the main switch and the displays go out. All
hotplates are switched off. The residual heat indicator
remains on until the hotplates have cooled down
sufficiently.
Notes
The hob will switch itself off automatically once all
hotplates have been switched off for a while (10-
60 seconds).
The settings remain stored for 4 seconds after the
hob has been switched off. If you switch it on again
during this time, the hob will operate using the
previously stored settings.
Setting a hotplate
Use the + and - symbols to set the desired heat setting.
Heat setting 1 = lowest setting
Heat setting 9 = highest setting
There is an intermediate setting between each heat
setting. This is identified by a dot.
Setting the heat setting
The hob must be switched on.
Touch the
symbol to select the hotplate.
$
1.
up in the heat setting display,
heat setting display.
Touch the+ or - symbol within the next 10 seconds.
2.
The basic setting appears.
+ symbol: Heat setting 9
- symbol: Heat setting 4
To change the heat setting: Touch the + or - symbol
3.
until the desired heat setting appears.
Switching off the hotplate
There are 2 ways to switch off the hotplate.
symbol. A signal sounds.
#
symbol until the display light
#
lights up under the
¬
Briefly touch the
after the other.
After about 10 seconds, the residual heat display
appears.
Use the
+ or - symbol until
seconds, the residual heat display appears.
Note: The last selected hotplate remains activated. You
can set the hotplate without selecting it again.
Table of cooking times
The following table provides some examples.
Cooking times and heat settings may vary depending
on the type of food, its weight and quality. Deviations
are therefore possible.
For bringing liquids to the boil, use heat setting 9.
Stir thick liquids occasionally.
Food that needs to be seared quickly or food which
loses a lot of liquid during initial frying is best seared in
several small portions.
Tips for energy-saving cooking can be found in the
Environmental protection section.~ Page 31
Melting
Chocolate coating
Butter, honey, gelatine
Heating and keeping warm
Stew (e.g. lentil stew)
Milk**
Heating sausages in water**
Defrosting and heating
lights
Frozen spinach
Frozen goulash
Poaching, simmering
Dumplings
Fish
White sauces, e.g. béchamel
sauce
Whisked sauces, e.g. sauce Béar-
naise, hollandaise
Boiling, steaming, braising
Rice (with double the quantity of
water)
Rice pudding
Unpeeled boiled potatoes
* Ongoing cooking without a lid
** Without lid
*** Turn frequently
Operating the appliance
symbol on the hotplate 2x one
$
appears in the heat setting display.
$
symbol to select the hotplate. Touch the
appears. After about 10
Ongoing
cooking set-
ting
1-1.
1-2
1-2
1.-2.
3-4
2.-3.
2.-3.
4.-5.*
4-5*
1-2
3-4
2-3
1.-2.
4-5
en
Ongoing cook-
ing time in min-
utes
-
-
-
-
-
10-20 min
20-30 min
20-30 min
10-15 min
3-6 min
8-12 min
15-30 min
35-45 min
25-30 min
33

Publicité

loading

Ce manuel est également adapté pour:

B1ccc0an0