Safety Instructions; Parts Description - AudioSonic 0599763 Mode D'emploi

SAFETY INSTRUCTIONS

By ignoring the safety instructions the manufacturer can not be hold responsible for
the damage.
EXCLAMATION POINT - within an equilateral triangle, is used to indicate that a
specific component shall be replaced only by the component specified in that
documentation for safety reason.
LIGHTNING FLASH WITH ARROWHEAD SYMBOL - within an equilateral
triangle, is intended to alert the user to the presence of uninsulated dangerous
voltage within the products enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
• The AC/DC adaptor and main unit shall not be exposed to dripping or splashing;
no objects filled with liquids, such as vases, shall be placed on the apparatus.
• The AC/DC adaptor of the apparatus should not be obstructed or should be easily
accessed during the intended use.
• To completely disconnect the power input, the AC/DC adaptor of the apparatus
should be disconnected from the mains, as the disconnected device is the AC/DC
adaptor of apparatus.
• If the supply cord is damaged, it must be replaced by the manufacturer, its service
agent or similarly qualified persons in order to avoid a hazard.
Warning:
To reduce the risk of electric shock, do not remove cover (or back). No user-
serviceable parts inside. Refer servicing to qualified service personnel.

PARTS DESCRIPTION

1. Mem. / Prog.
2. Skip -
3. Skip +
4. Power indicator
5. Play/pause/ch+ button
6. Stop/ch- button
7. Repeat button
8. Volume - button
9. Source/mode button
10. On/standby button
11. Volume + button
12. DC in jack
13. Phone jack
14. Aux- in Jack
BEFORE THE FIRST USE
Take the appliance and accessories out the box. Remove the stickers, protective
foil or plastic from the device.
POWER SOURCES
AC power
• You can power your portable system by plugging the detachable AC power cord
into the DC inlet at the back of the unit and into a wall AC power outlet. Check
that the rated voltage of your appliance matches your local voltage. Make sure
that the AC power cord is fully inserted into the appliance.
• This set has a built-in power saving system which will automatically put the set
into a ""standby mode"" when it detects that the set is not in use.
Note: this function is only available during AC operation.
Instruction Manual
4
3
5
2
6
1
7 12
8
11 13
9
10 14
EN
3