Philips Sonicare HX6780/97 Mode D'emploi page 18

EngliSH
18
4 Remove the protective screen in front of the
UV light bulb.
To remove the screen, grasp the edges next to the
snaps, gently squeeze and pull out the protective screen.
5 Remove the UV light bulb.
To remove the light bulb, grasp it and pull it out of
the metal clasp.
6 Clean the protective screen and the UV light
bulb with a damp cloth.
7 Reinsert the UV light bulb.
To reinsert the light bulb, align the bottom of the
light bulb with the metal clasp and push the bulb
into the clasp.
8 Reinsert the protective screen.
To reinsert the screen, align the pegs on the screen
with the slots on the reflective surface near the UV
light bulb. Push the screen straight into the slots on
the sanitiser.
Storage
If you are not going to use the appliance for an
extended period of time, remove the mains plug from
the wall socket. Then clean the appliance and store
it in a cool and dry place away from direct sunlight.
You can use the cord wrap feature on the sanitiser
(specific types only) to store the mains cord neatly.
You can store brush heads on the pegs at the back
of the charger.