Screw Lock Type Crown; How To Change The Display Mode - Seiko V192 Manuel D'instructions

SCREW LOCK TYPE CROWN

◆ Some models may have a screw-lock mechanism that can securely lock
the crown by screw when not in use.
◆ Locking the crown will help to prevent any operational errors and enhance
the water resistant quality of the watch.
It is necessary to unlock the screw lock type crown before using it. Once
◆
you have finished using the crown, make sure to relock it.
l How to use the screw lock type crown
Keep the crown securely locked unless you need to use it.
[How to unlock the screw lock type crown]
Turn the crown counterclockwise.
The crown is unlocked and can be used.
[How to lock the screw lock type crown]
O n c e you have f ini s h e d u s in g t h e c r ow n, t ur n i t
clockwise while gently pressing it in toward the watch
body until it stops.
• W hen locking the crown, turn it slowly with care, ensuring that the screw is properly engaged.
• Be careful not to forcibly push it in, as doing so may damage the screw hole in the case.
8

HOW TO CHANGE THE DISPLAY MODE

◆ The display mode alternates between the POWER RESERVE DISPLAY mode
and the STOPWATCH mode by following the procedure below.
If button A is pressed in the POWER RESERVE DISPLAY mode, the mode is switched to the
STOPWATCH mode. The STOPWATCH minute hand is reset to the 0 position and stopwatch
measurement starts simultaneously.
MODE
POWER RESERVE DISPLAY
Minute hand
A
Small second hand
Power reserve indicator
I After measurement function is complete and the stopwatch is reset, press button
B to return to the POWER RESERVE DISPLAY mode.
STOPWATCH MODE
STOPWATCH 1/5-second hand
A
B
B
STOPWATCH minute hand
9