Publicité
Les langues disponibles
Les langues disponibles
Operations
02 Dryness
03 Temp.
04 Time
05 Digital Graphic
Display
06 Eco Dry
07 Adjust Time
34
English
DV7350N_DC68-03784L-02_EN.indd 34
Press to select a dry level. You can select from 4 different
options. Please refer to following recommendations to select the
appropriate dryness.
• Larger or bulkier loads may require Very Dry or More Dry for
complete dryness.
• Damp Dry is designed to partially dry items. Use for items that
lay flat or hang to dry.
NOTE
This option is not available with REFRESH, WRINKLE RELEASE,
SANITIZE, TIME DRY and QUICK DRY.
Temperature can only be adjusted in TIME DRY cycle. Press to
change the temperature of the current cycle. You can select from
3-4 different options. Please select the appropriate temperature
depending on the items in the load.
• High: For sturdy cottons or those labeled Tumble Dry.
• Medium: For permanent press, synthetics, lightweight cottons,
or items labeled Tumble Dry Medium.
• Low: For heat sensitive items labeled Tumble Dry Low or
Tumble Dry Warm.
• Extra Low (DVE50T7350* model only): Provides the lowest
heated drying temperature possible.
Press to adjust the drying time for the Manual Dry cycles. This
is not available with the Sensor Dry cycles because the dryer
determines the drying time by sensing the current moisture level
of the load.
Displays all cycle information, including the cycle time,
information code, and operating status.
This function is available with NORMAL and TIME DRY.
With the Eco Dry activated, drying takes a longer time but the
power consumption is reduced.
The drying time can be extended by up to 3 times depending on
the temperature and load. The Eco Dry function is enabled by
default.
You can change the set time in the Manual Dry cycles (TIME DRY,
QUICK DRY) and WRINKLE RELEASE. To change the cycle time,
press
or
until the desired time is displayed.
2020-12-15
4:24:29
Publicité
