Before The First Use - Domo Xpower Mode D'emploi

BEFORE THE FIRST USE

· Before use, remove all packaging materials and any promotional stickers.
· Before first use, clean the various parts of the appliance.
· Be careful: the blades are very sharp.
USE
MIXING CUP 500 ML
1. Put the upper blade onto the lower blade and bring it to its locked position by
turning counterclockwise. (1)
2. Fit the upper and lower blades onto the fixed shaft in the bowl. (2)
3. Place the ingredients in a mixing cup and turn the connector clockwise on the
cup, using the notch provided.
4. Place the motor section on the top.
5. Put the plug in the socket and push down on the motor section to make the
appliance work.
6. After use, remove your hands from the appliance. Unplug the appliance and
wait until the blades come to a complete stop.
7. Remove the motor section, the connector and the blades in order to empty the contents.
You can separate the upper blade from the lower blade by turning it clockwise and pulling
it up.
MIXING CUP 1250 ML
1. Put the upper blade onto the lower blade and bring it to its locked position by turning
counterclockwise.
2. Fit the upper and lower blades onto the fixed shaft in the bowl.
3. Place the ingredients in the mixing cup and position the connector on the mixing cup.
4. Place the motor section on the top.
5. Put the plug in the socket and push down on the motor section to make the appliance
work.
6. After use, remove your hands from the appliance. Unplug the appliance and wait until
the blades come to a complete stop.
7. Remove the motor section, the connector and the blades in order to empty the contents.
You can separate the upper blade from the lower blade by turning it clockwise and pulling
it up.
Notes:
· This appliance is desgned is designed for intermittent use. Please run the appliance with
pulses. Do not operate the unit longer than 10 seconds continuously.
24
DO9191MC
(1)
(2)