Publicité
Les langues disponibles
Les langues disponibles
SET UP & USE
OPERATION
CONTROL PANEL
To operate the dryer:
1.
Select the program.
2.
Use default Time or set the time. (Unless using sensor dry).
3.
Touch Start/Pause to start the dryer.
NOTE: ALWAYS make sure items being dried have gone through the Spin cycle in the
washing machine first. Do not put soaking wet clothes in the dryer.
Power
When the power cord is plugged into the power outlet, the power button will be
slightly illuminated. To operate the dryer, touch "power" and select the program. The
default program is High Temperature Drying. The time can be set for all programs
except Sensor Dry.
Programs
Touch "Program" to select from the different drying programs: High Temperature
Drying, Sensor Dry, Air Dry or Anti-Wrinkle)
High Temperature Drying:
This program is used to dry large items like sheets and bedding.
When this program is selected the light bar will illuminate red. The default time is 150
minutes. To change the default time select START/PAUSE. The maximum time is 200
minutes.
Sensor Dry:
This program will dry at high heat and the dryer will shut down automatically once
the clothing is dry.
When this program is selected the light bar will illuminate white. The time display
will indicate "IHS" The maximum time is 200 minutes. The time cannot be manually
selected in this program.
Page 13
Publicité
