ETNA KCV143 Serie Mode D'emploi page 41

INSTALLATION AND CONNECTION
Selecting the location
• This refrigerating appliance is not intended to be used as a built-in appliance.
• Do not place the appliance near a source of heat, such as a gas cooker, radiator or boiler,
etc., and do not expose it to direct sunlight.
• Place the appliance in a dry and well aired room. The permitted ambient temperature range
for the appliance depends on the appliance's climate class, which is shown on the type
plate.
Description
Extended temperate
Temperate
Subtropical
Tropical
Do not place the appliance in a room where the temperature can fall below the lowest
permitted ambient temperature: the appliance may not work properly!
Do not place the appliance in a room where the temperature can fall below 5 °C: the
appliance may become defective!
The appliance is not suitable for outdoor use and may not be exposed to rain.
Place the appliance in a room with a sufficient volume of air. The room must have a
volume of at least 1 m
shown on the type plate on the inside of the appliance.
Overall dimensions
KCV143: 495
KCV161: 554
Provide sufficient space around the appliance
to allow for proper ventilation and air flow
around the appliance.
Class Ambient temperature range °C
SN +10 to +32
N +16 to +32
ST +16 to +38
T +16 to +43
of air for every 8 grams of refrigerant. The quantity of refrigerant is
3
Required space in use
KCV143: 695
KCV161: 754
Relative humidity
≤ 75%
Total space required in use
KCV143: 940 - KCV161: 1038
EN 13