BOMANN DU 7607 G Mode D'emploi page 42

Assembly
WARNING:
 When assembling or inserting the extraction filter
as well as the carbon filter, the appliance must not
be connected to the mains.
 Failure to use the mounting fixtures may lead to a
risk of electric shock.
CAUTION:
 Before mounting, check that the wall has enough
load capacity to bear the cooker hood.
 When drilling the holes in the wall always make
sure that no existing electrical cables or other ob-
jects are damaged.
 Make sure that the ventilation slots are clear of
obstacles and are not covered.
NOTE: Recommendations for preparation work
 When installing, ask another person to assist.
 Wear protective gloves to prevent injuries from
any sharp edges.
Fig. 2
Fig. 4
Fig. 2a
Fig. 5
Drilling dimensions
Fig. 1
A Shaft closure bracket
B Shaft middle bracket
Fig. 6
42
unit mm
C Suspension housing
D Securing housing
Fig. 3
Fig. 7