Philips POCKET MEMO PSE8000 Mode D'emploi page 27

Display menu
Brightness
Adjust the brightness of the display. The brightness level of the
display will affect how quickly the device consumes battery
power.
Backlight
Set the length of time the device waits before turning off the
display' s backlight:
• Auto: adjusts the brightness of the display automatically and
turns off the display' s backlight after 8 seconds.
• 8 sec (default)
• 20 sec
• On
Appearance
Select a display mode: Advanced (default), Classic.  Start-
up screen, p. 9.
Record lamp
Enable/disable the LED light.
Language
Set the language for the device' s user interface: English,
Deutsch, FranÇais, Español, Italiano.  Set the language,
p. 13
Device menu
Beep
Enable/disable key and signal tones.
Acoustic feedback
Allows you to listen to the recording while forwarding or
rewinding.  Quick search, p. 16.
Power save
Set the length of time before the recorder will enter into power-
save mode: 1 min, 5 min (default), 10 min, 15 min, Off.
 Power-save mode, p. 13.
Date & time
The date and time entered are saved with each recording as the
recording time.  Set the date and time, p. 13
Slide switch
You can customize the functionality of the slide switch. By default,
the slide switch is set to International.
Position Interna- Philips
tional
1
G A
2
F
C/G
3
C F/H
4
B B
* EOL and REC STANDBY buttons switch functionality.
Auto backspace
Move the slide switch briefly to the B REW position to jump
back the configured number of seconds in the recording: Off
(default), 1 sec, 2 sec, 3 sec, 4 sec.
Philips German
classic*
A A
C/G F/H
F/H C/G
B B
27
EN