MSI PRO Z690-P WIFI Mode D'emploi page 25

JDASH1: Tuning controller Connector
This connector is used to connect an optional Tuning Controller module.
2 6
1 5
JRAINBOW1: Addressable RGB LED connector
The JRAINBOW connector allows you to connect the WS2812B Individually
Addressable RGB LED strips 5V.
1
⚠
CAUTION
Do not connect the wrong type of LED strips. The JRGB connector and the JRAINBOW
connector provide different voltages, and connecting the 5V LED strip to the JRGB
connector will result in damage to the LED strip.
⚠
Important
The JRAINBOW connector supports up to 75 LEDs WS2812B Individually
∙
Addressable RGB LED strips (5V/Data/Ground) with the maximum power rating of
3A (5V). In the case of 20% brightness, the connector supports up to 200 LEDs.
Always turn off the power supply and unplug the power cord from the power outlet
∙
before installing or removing the RGB LED strip.
Please use MSI's software to control the extended LED strip.
∙
Pin Signal Name
1 No Pin
3 MCU_SMB_SCL_M
5 VCC5
Pin Signal Name
1 +5V
3 No Pin
23
Pin Signal Name
2 NC
4 MCU_SMB_SDA_M
6 Ground
Pin Signal Name
2 Data
4 Ground