Copying Files Using Your Network (Samba); File Copy - Eminent EM7195 Mode D'emploi

6. When you have finished copying files, disconnect the USB cable. The EM7195
will restart automatically.
Note: If you do not have a TV present, simply wait for 30-60 seconds and the EM7195
will automatically enter USB copy mode if it is connected to the PC by USB 3.0

10.2 Copying files using your network (Samba)

The moment the hard disk of the EM7195 has been formatted, a Samba server will be
installed automatically on the EM7195. This Samba server allows you to easily access
the EM7195 and copy data to the internal hard disk of the EM7195.
1. Make sure you know your EM7195's IP-Address. This IP-Address can be found
using the 'Setup' and then 'Network' option.
2. Then open the computer's webbrowser or Windows Explorer.
3. Empty the address bar and fill in \\IP-adres, for example:
press the 'Enter' key.
4. Double-click 'HDD'.
5. The folders on the hard disk of the EM7195's will be shown. You can now easily
transfer media files from your computer to the hard disk of the EM7195.

10.3 File Copy

The EM7195 has the possibility to copy data from USB devices, memory cards,
external devices and your network to the built-in hard disk. Also, copying from the
internal hard disk to other devices is possible. This way, there is no need to connect
the hard disk to your computer in order to copy media files to your hard disk. Use the
following steps to copy data to your hard disk.
1. Go to 'Document'.
2. 'File Copy' is selected by default press the 'OK' button
3. You will see a 'Source' and a 'Destination'. Here, you can select the source (left
panel) you want to copy media files from, and the destination (right panel) you
want to copy media files to.
4. In this example we will explain how to copy data from your external USB device
to the internal hard disk.
5. Select 'USB' at the 'Source' field and press the 'OK' button.
6. You will automatically be directed to the 'Destination' field. Select the destination,
in this case, the hard disk, or 'HDD' and press the 'OK' button.
7. Select the source drive at 'Source' and press the 'OK' button.
8. At the source field, select the folder you want to copy. Press the red button on the
remote control to mark files.
9. Press the right arrow key, you will be directed to the 'Destination' field.
10. Press the 'OK' button.
11. You can now select the folder you want to copy to and press the 'OK' button, or
you can select 'NEW-DIRECTORY' and press the 'OK' button.
36 |
ENGLISH
\\192.168.1.25 and then