Packing Contents; Mounting A Sata Hard Disk - Eminent EM7195 Mode D'emploi

To make your multi media experience complete, Eminent provides a luxurious remote
control with back light.

1.2 Packing contents

The following parts need to be present in the packing:
EM7195 HD player with DVB-t dual tuner
•
Remote control with backlight function
•
Batteries
•
HDMI cable
•
AV cable
•
Optical cable
•
SATA cable
•
USB 3.0 cable
•
Power supply
•
Manual
•

2.0 Mounting a SATA hard disk

For optimum usability, it is recommended to use the EM7195 with an internal SATA
hard disk. The Eminent EM7195 uses a patented hard disk locking system. With the
following steps we will explain how to mount the hard disk.
1. Take the EM7195 out of the packaging.
2. Open the hard disk slot on the side of the EM7195 by using the handle. The hard
disk slot opens.
3. Take your SATA hard disk with the label on top and the SATA connector on the
bottom. Make sure the SATA connection is pointed towards the hard disk slot of
the EM7195.
4. Carefully slide the hard disk into the hard disk slot, until you can feel some
resistance.
5. Now close the hard disk slot. The hard disk will slide into it's place and connect
automatically.
6. If you have already set up your player, skip to chapter 7.2 to format the hard disk.
Note: The disk must be formatted once, before you can use all features of your
EM7195. This format must be done using the menu inside the player. If you do not
format the disk, options such as time-shift and P2P downloads (BitTorrent, NZBget)
will be unavailable.
27 |
ENGLISH