Publicité
Les langues disponibles
Les langues disponibles
Operations
03 Dryness
04 Temp.
05 Time
06 Wrinkle Prevent
07 Eco Dry
08 Damp Alert
09 Drum Light
40
English
Untitled-1 40
Press to select a dry level. You can select from 5 different options (Less to
More). Please refer to following recommendations to select the appropriate
dryness.
• For larger or bulkier loads, select More for complete dryness.
• For items that needs to lay flat or hang to dry, use Less to partially dry
items.
NOTE
This option is not available with SANITIZE, ACTIVEWEAR, TIME DRY, QUICK
DRY, WRINKLE RELEASE, and AIR FLUFF.
Temperature can only be adjusted in TIME DRY cycle.
Press to change the temperature of the current cycle. You can select from 5
different options (Low to High). Please select the appropriate temperature
depending on the items in the load.
• High: For sturdy cottons or those labeled Tumble Dry.
• Medium: For permanent press, synthetics, lightweight cottons, or items
labeled Tumble Dry Medium.
• Low: For heat sensitive items labeled Tumble Dry Low or Tumble Dry
Warm. Provides the lowest heated drying temperature possible.
Press Time to select a drying time for the selected cycle. This is available
only with TIME DRY, QUICK DRY, WRINKLE RELEASE, and AIR FLUFF. This
button is not available for Sensor Dry cycles because exact drying times are
determined by fluctuating humidity levels.
Wrinkle Prevent provides approximately 180 minutes of intermittent
tumbling in unheated air at the end of the cycle to reduce wrinkling. Press
Wrinkle Prevent to activate this feature. The load is dry and can be removed
at any time during the Wrinkle Prevent cycle.
This function is available with NORMAL and TIME DRY. With the Eco Dry
activated, drying takes a longer time but power consumption is reduced.
The drying time can be extended by up to 3 times normal depending on the
temperature and load.
This alert is available for all Sensor Dry cycles except for SANITIZE and
ACTIVEWEAR. Available dry levels are 2, 3, 4 and 5 (More).
If a load contains mixed fabrics, the Damp Alert indicator blinks when
average dryness of the items in the load is 80 % dry. This lets you take items
that you don't want fully dried or that dry quickly out of the dryer early while
letting others continue to dry.
Press to turn the interior lamp on or off. The lamp stays lit for 2 minutes after
it has turned on, regardless of whether the power is on or off or the door is
open or closed, and then turns off automatically.
2023-08-10( )
12:26:40
Publicité
