Publicité
Les langues disponibles
Les langues disponibles
Troubleshooting
Information codes
The washer may display information codes to help you understand what is occurring with
your washer better.
Code
The WaterLevel sensor is not working properly.
•
•
1C
When the washer displays "1C", the washer do draining for 3 minutes. During
this time, the POWER button is inoperative.
Check the motor for operation.
3C
•
•
Water is not supplied.
•
•
•
•
4C
•
•
When the washer displays "4C", the washer do draining for 3 minutes. During
this time, the POWER button is inoperative.
•
4C2
52 English
WA3200T_DC68-03850D-04_EN.indd 52
WA3200T_DC68-03850D-04_EN.indd 52
Check WaterLevel Sensor wire harness.
If the information code remains, contact a customer service centre.
NOTE
Try restarting the cycle.
If the problem continues, call for service.
Make sure the water taps are open.
Make sure the water hoses are not clogged.
Make sure the water taps are not frozen.
Make sure the washing machine is operating with sufficient water
pressure.
Make sure that the cold water tap and the hot water tap are properly
connected.
Clean the mesh filter as it may be clogged.
NOTE
Make sure the cold water supply hose is firmly connected to the cold
water tap.
If it is connected to the hot water tap, the laundry may be deformed with
some cycles.
Meaning
2022-06-29
2022-06-29
6:25:35
6:25:35
Publicité
