Beko WMB 81242 LMBB Manuel D'utilisation page 16

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Discharging the water when the product does not have an
emergency draining hose:
a. Place a large container in front of the filter to catch water
from the filter.
b. Loosen pump filter (anticlockwise) until water starts to
flow. Fill the flowing water into the container you have
placed in front of the filter. Always keep a piece of cloth
handy to absorb any spilled water.
c. When the water inside the machine is finished, take out
the filter completely by turning it.
4. Clean any residues inside the filter as well as fibers, if
any, around the pump impeller region.
5. Install the filter.
6. If the filter cap is composed of two pieces, close the filter
cap by pressing on the tab. If it is one piece, seat the tabs
in the lower part into their places first, and then press the
upper part to close.
16 / 76 EN
Washing Machine / User's Manual

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Wmb 81242 lms

Table des Matières