First Use; How To Use - Vega Bain Marie 81404 Instructions D'emploi

Translation Operating instructions Water bath

6.2 First use

First cleaning
Clean the appliance before the first use (see Cleaning).
Connect the appliance
Life danger due to mains voltage!
Danger
When connecting the appliance to a socket without ground wire:
When connecting the appliance directly to the mains supply:
When connecting the appliance to a socket:
Insert the plug in the socket.
The installation of the appliance is completed.

6.3 How to use

Operating elements and advice.
The operating elements control the functions.
Switch/Button
1/0
Thermostat switch
The pilot lights show the operating state.
When the pilot light on the switch 1/0 is on:
The appliance is on.
When the pilot light on the appliance is on:
The appliance heats the water until it reaches the set temperature.
To fill up
Fill the vessel with water up to the mark.
Put in the container with food.
12
Make sure that the voltage and frequency of the mains correspond
to the values specified in the rating plate.
Connect the line cord exclusively to a socket with ground wire.
Do not use an extension cable or a multiple socket adapter to
connect the appliance.
Make sure that the line cord is not damaged.
Ask qualified personnel to install the appliance.
Ask qualified personnel to install the appliance.
To switch the appliance on and off
To adjust the temperature.
Function