Getac RX10 Manuel De Fonctionnement page 3

Before You Begin
For complete information of the product,
refer to the User Manual (in PDF format)
on your Windows desktop or Driver disc.
You can download the latest manual and
drivers by accessing the Getac web link at
http://www.getac.com  Support.
Getting Started
Unpacking
RX10 Tablet PC
AC adapter
Battery pack
Driver disc
NOTE: This packing list applies to standard
models. Select models may have different
items.
Installing the Micro-SIM Card
(Optional) and Battery Packs
1. Select models only: With the micro-SIM
card's chip side facing up and the beveled
corner pointing to the slot, insert the card
all the way into the slot.
2. With the battery pack correctly oriented,
attach its connector side to the battery
compartment at an angle (
press down the other side (
latch should be engaged in the locked
position ( ).
AC power cord
Stylus
Tether
Document(s)

) and then

). The battery
3. Make sure the latch is correctly locked, not
revealing the underneath red part.
NOTE: Battery pack model BP4S1P2100-S: For
use with Listed I.T.E. Tablet PC Model RX10
made by Getac Technology Corp.
Connecting to AC Power and
Starting Up
The first time you use your Tablet PC, use the
AC adapter.
1. Plug the DC cord of the AC adapter to the
power connector of the Tablet PC (
2. Plug the female end of the AC power cord
to the AC adapter and the male end to an

electrical outlet (
3. Press the power button (
seconds until the Power Indicator lights up.
4. The operating system, Windows, should
start.
When turning on your Tablet PC for the
very first time, you will be guided through
a setup process.

).
).
) for at least 2
1