Ceado B181 Manuel D'utilisation page 18

18
USE
1
Place the ingredients in the container in this order: first liquids and fruit, then ice and other solid
foods.
2
Stand the container on the base fitting it into its support as shown in figure 3.
3
Fit the lid on the container.
Note: When new, the lid of blender may require extra force to apply and remove. After a few
times it will fit perfectly.
4
Put the ON-OFF switch (7, Fig. 2) in position ON (I).
5
Select the desired speed with the selector
the motor by pressing the button
6
Most drinks require blending at high speed. Position the selector
preparing small quantities or when using the blender just to mix the ingredients.
7
The "PULSE" function can also be used, that is "momentary" operation, by pressing and
holding down the button
Note: You can use the "PULSE" function when preparing thick drinks that tend to "float" or to break
up nuts or other ingredients that are unable to circulate in the working zone of the blades.
8
The blender is also designed to crush ice and prepare FROZEN DRINKS from ice in cubes.
Remember that if you place the ice in the container already crushed this will greatly extend the
life of the appliance.
9
The blender is designed to ensure perfect preparation of the FROZEN DRINKS recipes
contained in the international texts of the IBA associations. If you use the quantities indicated
in those recipes you will always obtain the desired consistency.
Certain preparations may cause cavitation of the blender. This means the ratio of liquid to ice
is not correct. If this occurs, switch the blender off, remove the lid, stir the mixture with a spoon
and try again.
10
If you have to heat or chill a preparation made with the blender, do not place the container
directly in the oven or freezer. This could damage it. Empty the container into a suitable vessel.
and, holding one hand on the lid, turn on
(Fig. 4).
for the whole operating time desire.
GB
to "LOW" only when