Herschel HS220UD Instructions D'installation Et D'utilisation page 7

Pairing
Tap '+' top right of App
If this is your first
thermostat
adding you will be
asked to enter your
Wifi password.
You will not have to do
this when you add
subsequent
thermostats
App.
If you failed to pair, click "Retry" in SmartLife App. Long press the "M" button (5) on the control box to reset the
pairing mode of the heater, following the directions in the SmartLife App.
In situations where several wifi connections are available and the heater fails to find the right router connection,
we recommend you try the Alternative Pairing mode offered by the SmartLife app. This is an option offered by the
App if normal pairing mode fails.
More detailed help is available online via the Help & Support section of your local Herschel Website.
Operations available on the SmartLife App
From the main screen of the Smartlife app, you can access the following management features for the heater,
which are described more fully on the following page:
- Power On / Off (turns the heater on and off)
- Temperature override (Orange circle with + and – buttons)
- Manual Operation
- "Smart" Operation (Program Mode)
- Holiday Mode
- Settings
- Timer
Changing Network / disabling Wifi
You can move the heater to a new network if you need to. You will have to re-pair with the SmartLife app.
You can also de-activate and re-activate Wifi and revert to simple foot switch control. Long press the '-' button
on the receiver for 10 seconds to de-activate (blue Wifi LED goes out) and re-activate wifi (blue LED comes
back on).
Select "Small Home Appliances"
and then "Thermostats"
you are
to the
Select under desk heater
Activate the Power
switch on the heater
and then press the
foot switch until the
power signal light is
on, the Wi-Fi pairing
indicator will start to
flash rapidly.
Follow the
instructions on the
App to pair.
ENGLISH