For Your Safety; Grounding Instructions - Danby Products ARCTICAIRE ADR556RH Manuel D'utilisation

NOTE: The WARNING instructions issued in this manual are not meant to cover all possible conditions and
situations that may occur. It must be understood that common sense, caution and carefulness are factors
that cannot be built into all appliances. These factors must be supplied by the person(s) installing, maintain-
ing, or operating the appliance. Failure to install, maintain, and/or operate the equipment according to the
manufacturer's instructions may result in conditions which can produce bodily injury and/or property dam-
age. Contact your dealer, service agent or the manufacturer about any problems or conditions you do not
fully understand. (For Danby Customer Service call 1 800 26 DANBY / 1 800 263 2629)

FOR YOUR SAFETY -

vapors or liquids in the vicinity of this or any other appliance.
ELECTRICAL SERVICE INFORMATION -
and grounding must conform with the latest edition of Local and National Electrical Codes It is the customer's respon-
sibility to have the wiring and fuses checked by a qualified electrician to make sure adequate electrical power is avail-
able.
This appliance is designed to operate on a separate branch, polarized, three-wire, effectively grounded, 120 Volt 60
Hertz (alternating current) circuit protected by a 15 ampere fuse, equivalent fusetron or circuit breaker.
The three-prong grounding plug on the power cord should be plugged directly into a polarized three slot effectively
grounded receptacle rated 110/120 V.A.C.

GROUNDING INSTRUCTIONS -

electrical shock. Check with a qualified electrician or serviceman if you are in doubt as to whether your appliance out-
lets are properly grounded.
This appliance must be grounded. In the event of malfunction or breakdown, grounding will reduce the risk of elec-
trical shock by providing a path of least resistance for electrical current. This appliance is equipped with a cord having
an equipment-grounding conductor and 3 prong grounding plug. The plug must be connected into an outlet that is
properly installed and grounded in the accordance with all local codes and ordinances.
Do not modify the plug provided with the appliance. If it will not fit the outlet, have a proper outlet installed by a
qualified electrician.
If the household electrical supply does not meet the above specifications, or if you are not sure your home has an
effective ground, have a qualified electrician or your local electrical utility company check it and correct any problems.
WARNING - IMPORTANT NOTICES
To reduce the risk of fire or explosion, do not store or use gasoline or other flammable
To reduce the risk of fire, electric shock or personal injury, all wiring
Improper connection of the equipment-grounding conductor can result in a risk of
3