Philips 9000 Serie Mode D'emploi page 28

24
English
Problem
The appli­
ance does not
shave as well as
it used to.
I replaced the
shaving heads,
but the display
still shows the
replacement
reminder.
All manuals and user guides at all-guides.com
Possible cause
The shaving unit is
soiled or damaged
to such an extent
that the motor
cannot run.
The shaving heads
are damaged or
worn.
Hairs or dirt obstruct
the shaving heads.
You have not reset
the appliance.
Solution
Clean the shaving heads
thoroughly or replace
them. Also see 'Hairs or dirt
obstruct the shaving heads'
for a detailed description of
how to clean the shaving
heads thoroughly.
Replace the shaving heads
(see 'Replacement').
Clean the shaving heads in
the regular way (see
'Cleaning and
maintenance') or clean
them thoroughly.
To clean the shaving heads
thoroughly, remove the
shaving heads from the
shaving head holder one
by one (see
'Replacement'). Then
separate the cutter from its
guard and rinse each
matching set under the tap.
After rinsing, place the
cutter back into its
corresponding guard.
Finally, put the shaving
heads back into the
shaving head holder (see
'Replacement').
Reset the appliance by
pressing the on/off button
for approx. 7 seconds.