Qilive Q.3603 Manuel D'utilisation page 4

1. SAFETY INSTRUCTIONS
EN
1. Type of chair: type c
2. Soft castors for hard floors. Hard castors for soft floors.
3. Warning: only trained personnel may replace or repair seat height adjustment
components with special tools!
2. PRODUCT DESCRIPTION
1. Castors x 5
2. Star base
3. Gas spring
4. Gas spring cover
5. Height adjustment lever
6. Seat
7. Armrest x 2
8. Backrest
9. Neck cushion
10. Lumber cushion
3. BEFORE FIRST USE
■ Unpack all parts and check for damage that may have occurred during transport.
■ If any parts are damaged or missing, do not use the product and return it to the
retail outlet immediately.
■ Clean the product and its parts before the first use (see CLEANING AND CARE).
4. ASSEMBLY
Follow the assembly steps to securely assemble your gaming chair. Please check this
assembly every six months and tighten the screws with the Allen key provided.
4.1. ASSEMBLING THE CASTERS AND STAR BASE
1. Attach the five casters by pushing them onto the star base until they are securely
fixed into place.
2. Insert the gas spring into the centre of the base. Remove the protective cap (if
necessary).
3. Place the gas spring cover over the gas spring. Make sure to put it in place now
because you will not be able to include it in the assembly at a later stage.
11. Angle regulator cover x 2
12. Back screws x 4 (M8 x 25mm)
13. Mechanism+armrest screws x10
(M8 x 20mm)
14. Mechanism+armrest washers
15. Mechanism+armrest spring
washers
16. Angle regulator caps x 4
17. Angle regulator screws x 2
18. Allen key
4