Publicité
Les langues disponibles
Les langues disponibles
OPERATION - Using for the first time
1. Take the appliance out of the packaging including the plastic protection of the stainless steel blades.
2. Clean the appliance (see 'Cleaning and maintenance').
ASSEMBLING AND SEPARATING THE BLADES
1. Place the longest (bottom) blade on a flat surface.
2. Assemble the blades by pushing the upper blade onto the bottom blade. Then turn the upper blade
counter-clockwise to join the blades together. Ensure both blades are firmly attached.
3. Separate the steel blades by holding the lower blade firmly. Then turn the upper blade clockswise before
pulling them apart.
ATTENTION:
•
The blades are very sharp, handle with caution!
•
Ensure all four blades are covered by the plastic protection before assembling and separating them.
OPERATION
1. Fit the stainless steel blade (4,5) to the separate drive shaft (7) of the bowl (6).
2. Add all ingredients.
3. Fit the anti-splash lid (3) to the bowl.
4. Fit the motor unit (2) to the anti-splash lid and rotate until it falls into the recesses of the anti-splash lid.
5. Connect the appliance (9) to the wall socket.
6. Press the pulse button (1) shortly, repeat this untill you have the result you would like to have.
ATTENTION:
•
The chopper is fitted with a safeguard: the appliance won't work without the anti-splash lid.
•
Never use the device for longer than 15 seconds. Then wait 15 seconds before turning on the device again.
TIPS:
•
Optionally add the second stainless steel chopping knife for a fine result.
•
The pulse switch only works if you hold the switch in this position.
•
Cut the ingredients into small pieces before filling the bowl.
•
Do not chop hard ingredients, such as coffee beans, nutmeg and ice cubes.
•
If the ingredients stick to the knife or inside the work bowl, turn the machine off and remove the lid.
CLEANING AND MAINTENANCE
1. Fill the bowl with warm water and fit the blades, anti-splash lid, and motor unit.
2. Press the pulse button shortly.
3. Unplug the appliance and separate the motor unit, anti-splash lid, and blades.
4. Clean the motor unit with a damp cloth, if necessary moistened with a couple of drops of washing-up
liquid. After cleaning, dry the motor unit thoroughly.
5. Store the mixer.
TIPS:
•
The chopping knives and bowl are dishwasher-safe, these parts must be placed at the top of the dishwasher.
•
Rinse all parts thoroughly to remove all soap residues and dry them thoroughly and clean the bowl after each use.
•
Some foods, such as beetroot and carrots, can cause discoloration of the plastic parts of the appliance.
Clean these parts with cooking oil.
•
Never use corrosive or scouring cleaning agents or sharp objects (such as knives or hard brushes)to
clean the appliance.
•
Do not immerse the motor unit in water, or in other liquids.
14
14
EN
EN
Publicité
