Publicité
Les langues disponibles
Les langues disponibles
from the temperature set after 7 hours working
-
Too many items have been put into the unit at one time, and the temperature inside the appliance
is very different (+/- 4°C) from the temperature set after 7 hours working
-
The door has not been closed tightly
When the surrounding temperature is 25℃ and the wine cooler has no bottle loaded, it will take
around 12 minutes to increase the wine cooler's temperature from 5℃ to 12℃. Under the same
circumstance, it will take around 25 minutes to decrease the wine cooler's temperature from 12℃ to
5℃. The less the temperature span is, the less time it will take. The setting temperature of upper
zone should be lower than the setting temperature of lower zone
Door alarm
If the door has been left open for more than 60s, the alarm will sound. Once the set temperature has been
reached in the appliance, the alarm stops and the relevant temperature display stops flashing.
However, if the noise disturbs you, you can switch the alarm off before this if you wish by pressing the key I
once. The alarm will stop. The relevant temperature display continues to flash until the set temperature has
been reached. The display then lights up constantly and the alarm system is fully active again.
Interior light
The interior light makes it easy to view your wines labels and enhances the display of your collection.
Touching the
mark (J) toggles between two modes of operation for the internal lights:
-
Functional mode (default): the light will turn on only when the door is open, this is the most
economic mode
-
Showcase mode: the lights will be on whether or not the door is open. To turn this permanent light
mode and get back the default mode, please push again the light button
Modes
SABBATH MODE
Sabbath mode is available for the observance of certain religious holidays. This mode turns off the displays,
interior light and audible alarms and prevents them from turning on again. Normal cooling operations will still
take place. To initiate sabbath mode, press the power (A) and light (J) keys at the same time for at least 5
seconds. The indicator light will flash four times and confirm the sabbath mode is ON. Sabbath mode can be
stopped by repeating the above process. The sabbath mode will automatically exit after 96 hours.
ECO DEMO MODE
Eco demo mode can be activated by presenting the appliance at exhibitions, shows or in salesrooms. In eco
demo mode, compressor and all fan motors are switched OFF. By pressing and holding the "+" and "- " (C and
B) and light (J) keys at the same time for at least 5 seconds, the indicator light will flash five times to confirm
the input and the unit will operate in eco demo mode. Eco demo mode can be abandoned by repeating the
above process, be noted that compressor and fan will activate 5 minutes later (for compressor protection
reason).
44
(J).
Publicité
