RELAXXNOW RXM250 Mode D'emploi page 16

How to operate the RXM250 Massager:
• Place the massager on the desired body zone.
• Put your hands in the arm loops and keep them at a comfortable
point of tension for as long as you are using the RXM250
Massager on the neck, shoulder, back or hips. Alternatively, the
fixable straps can be used.
• Press the On / Off button on the control panel and hold for 3
seconds. The RXM250 starts with the lowest massage option
and the highest heat support (also when in battery mode).
• Use the button to increase the speed of the massage function.
The blue glow of the button symbolizes the higher level of the
massage and pump function (also when in battery mode).
• During the massage, you can adjust the heat with the button.
The heating function is preset by default at the highest
level. The white light of the button symbolizes the switched
on heat function, in the lowest level. The blue glow of the
key symbolizes the next higher level. The heat support is
switched off as long as the button does not light up anymore
(also when in battery mode).
• Use the button to turn ‚pump-mode' on and off. The
pump mode is shown by default. The blue glow of the
button symbolizes the deactivated pump assistance
(also when in battery mode).
!
TOUBLE-SHOOTING
- If the RXM250 Massager can not be switched on, please check whether the
plug is correctly inserted and check the power supply.
- If the sound of the RXM250 Massager gets progressively louder, it may be
because it is in continuous use for too long. Switch off the RXM250 Massager
for at least 30 minutes before restarting.
- If the RXM250 Massager stops during use, it may be because the engine has
overheated. Leave the RXM250 Massager turned off for at least 30 minutes
before restarting.
16 Relaxxnow