Glacier bay 873W-1001 Guide D'utilisation Et D'entretien page 12

Adjusting the temperature
5
Reinstall the red limit stop ring
□
Reinstall the red limit stop ring (1) and readjust
the teeth engagement position so that the stem
can not move beyond the adjusted point.
6
Restalling the handle,
escutcheon, and inverter
□
Place the inverter (1) onto the valve body (D).
□
Screw the sleeve (2) onto the valve body (D).
□
Place the escutcheon (E) onto the valve
body (D) and secure with the escutcheon
screws (AA).
□
Place the handle (F) onto the inverter (1) and
secure with the handle screw (G), insert the
index (H) into the handle (F).
E
AA
F
G
H
12
1
D
1
2