Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Washing a load of laundry
Options
Child Lock
Child Lock prevents children from playing
with your washer.
Activating the Child Lock function
Press and hold Spin and Soil Level
simultaneously for approximately 3 seconds.
•
When you activate the Child Lock
function, the
blinks.
Using the Child Lock function
If the lid is opened when the Child Lock
function is on, "dC" is displayed and an
alarm sounds.
If the water level in the tub is above the
•
safe water level, "dC" is displayed on the
LED display and the washer starts to
drain water by force after 30 seconds.
•
If the water level in the tub is above
the safe water level and the Child Lock
function is turned on while the door
is open, "CL" is displayed on the LED
display even if the power of the washer
is turned off and the washer drains
water by force.
•
Even if the power of the washer is
turned off, if the lid is opened while the
water level in the tub is above the Reset
water level, "CL" is displayed on the LED
display without the alarm sounding and
the washer starts to drain water. When
the draining operation finishes, the
power is automatically turned off again.
•
You have activated the Child Lock
function while the washer is running, the
Start/Pause button will not work.
34 English
WA7700M_DC68-03774D-01_EN.indd 34
Child Lock indicator
•
After the compulsory drain, the "CL"
blinks at 1 second intervals and the
product enters the "CL" mode. (When
the product is in the "CL" mode, only the
Power button works.)
•
To cancel the "CL" mode, you need to
turn the power off and then on again.
•
To cancel the "dC" mode, deactivate the
Child Lock function. To deactivate the
Child Lock function, press and hold Spin
and Soil Level simultaneously for at least
3 seconds.
2017-11-28
10:34:44
Publicité
Chapitres
Table des Matières
Dépannage
