Makita MP100D Manuel D'instruction page 9

Using the sport ball needle or
tapered adapter
You can inflate small items such as sport balls or float-
ing tubes. To inflate sport balls, use the sport ball nee-
dle. To inflate floating tubes, use the tapered adapter.
1. Unfold the air chuck clamp.
2. Attach the sport ball needle or tapered adapter to
the air chuck.
1 2
► 1. Air chuck clamp 2. Air chuck 3. Sport ball needle
4. Tapered adapter
3.
Fold the air chuck clamp firmly.
4. Insert the sport ball needle or tapered adapter into
the hole on the item.
5. Turn on the tool, and then set the appropriate
pressure value using the pressure gauge.
NOTICE:
When inflating a floating tube, the
pressure gauge will not display an accurate value
since the pressure of floating tube is less than 20
kPa (3 PSI). When inflating a floating tube, do not
use the value on the pressure gauge, but inflate it
by checking the status of the floating tube.
6. Keep pulling the switch trigger until the tool stops.
The item is inflated with the specified pressure.
MAINTENANCE
CAUTION:
Always be sure that the tool is
switched off and the battery cartridge is removed
before attempting to perform inspection or
maintenance.
NOTICE:
Never use gasoline, benzine, thinner,
alcohol or the like. Discoloration, deformation or
cracks may result.
To maintain product SAFETY and RELIABILITY,
repairs, any other maintenance or adjustment should
be performed by Makita Authorized or Factory Service
Centers, always using Makita replacement parts.
MAKITA LIMITED WARRANTY
Please refer to the annexed warranty sheet for the
most current warranty terms applicable to this product.
If annexed warranty sheet is not available, refer to the
warranty details set forth at below website for your
respective country.
United States of America: www.makitatools.com
Canada: www.makita.ca
Other countries: www.makita.com
3
4
9 ENGLISH