Publicité
1-2 Attach brackets to a TV with an irregular back
1
[03]
[15]
[16, 17]
1-2 Attach brackets to a TV with an irregular back
M4
[16]
6
2
[03]
[15]
[16, 17]
[15]
[08]
[13]
Attach shoulder washers [15] and spacers to the brackets [03].
1.
Push the shoulder washer [15] through the appropriate
openings of the brackets [03].
2.
Snap shoulder washer [15] into the spacer you selected in
step 1-1.
If your TV has a curved or obstructed back, or if you need more
room for cables, recesses, or protrusions, use the 14mm or 24mm
spacer [16, or 17].
In step 1-1 if you selected the:
M4 x 30mm bolt [08] use the M4 washer [13] and spacer [16].
M6 x 40mm [10] or M8 x 40 mm bolt [12], use the M6/M8 washer
[14] and spacer [17].
Confi rm that the brackets are level on the back of the TV.
Standard confi gurations are shown. For special applications,
or if you are uncertain about your hardware selection, contact
Customer Service.
M6/M8
[17]
[15]
[10, 12]
[14]
6901-002143 <02>
Publicité
