Publicité
Les langues disponibles
Les langues disponibles
10.5.1
The handle installing
10.5.2
Wine shelves
Usual shelf
Storage depends on the bottle size and kind.
10.5.3
To remove a shelf
Remove all bottles from the shelves. Lift the shelf upwards and the gently pull it out,
(eventually untighten the screws).
► Ensure that the tabs are firmly engaged in place before storing any bottles.
► Any of the wine shelves can be removed to accommodate larger bottles.
► Spread your bottles out as evenly as possible over the shelves, so weight is not
concentrated in one point; and make sure your bottles will not touch the back of the
cabinet.
Lower shelf
Please note
The wine cooler comes with one
metal stainless steel handle. To install
simply screw them to the door with
the supplied screws.
To do this, slide the rubber seal on
the back of the door to the side to lay
open the predrilled holes. Use the
included screws to install the handle
on the door.
Then reinsert the rubber seal in the
correct position.
30
Publicité
