Operating Instructions; Overview; Assembly; Attaching The Motorcycle To The Transport Trailer - LAS 10323 Manuel De L'opérateur

5. OPERATING INSTRUCTIONS

5.1 OVERVIEW

1 - Handlebar loops
2 - Tank protector
3 - Ratchet
4 - Strap with clamping lock
5 - J-hooks

5.2 ASSEMBLY

The motorcycle tie-down system consists of two tensioning straps each with a handlebar loop and a ratchet. The tensioning
straps are criss-crossed in the tank protector, see Image 2.

5.3 ATTACHING THE MOTORCYCLE TO THE TRANSPORT TRAILER

Drive your motorcycle right to the front of the transport trailer, until the front wheel sits correctly in the holder. Select the
suitable fixing method for your motorcycle, Images 3 - 6. Set up the tie-down system as shown in the images. Tighten the
tensioning straps gently and evenly with the help of the ratchets. Using the tensioning strap with clamp lock, affix the back
tire of your motorcycle to the wheel rail of the transport trailer, Image 7. Now tighten the tensioning strap and lock the ratchet.
Image 3: Sketch Version 1
8
Image 1: Overview
Image 4: Version 1
Image 2: Set-up