HOMCOM 820-292V70 Manuel D'instructions page 3

Before operating and Installation instructions:
The product must be installed on a flat, dry surface. Install the four legs with the supplied
12 screws, as follows:
Location of Controls
1. Thermostat control knob (TEMPERATURE SETTING): Adjust to maintain room
temperature.
2. Flame switch: Switches the flame and turns it on/off.
3. Heating setting: Press
4. Heating setting : Press
pressing first).
5. Flame dimmer control: Adjust to set flame intensity.
Screw
for 1000W.
and together for 2000W (cannot operate without
3
Leg