Bestherm FT-30MJ3 Manuel D'instructions page 15

3. Fix the Neck Fixing Knob to the Neck Fixing Bolt.
4. Screw in the Tilt Adjustment Screw to the neck of the Motor Unit.
Now you can adjust the tilt of the Motor Unit and secure it in
position by tightening the Tilt Adjustment Screw.
OPERATION
Warning: Make sure that the fan is fully assembled and that the grills
are in place and locked before switching on.
● Place your fan on a level and dry surface, keeping in mind the
safety precautions outlined.
● Plug the fan into a suitable mains socket (see Technical
Specifications for details).
Speed Adjustment: Turn the On/Off/ Speed Dial to the desired
setting. There are 4 settings - 0 (Off), I (Low speed), II (Medium
speed) and III (High speed).
Oscillation function: Push the Oscillation Knob down to start
oscillation. Pull it up to stop oscillation.
Tilt Adjustment: To adjust the air flow, the tilt angle can be adjusted.
To do this, loosen the Tilt Adjustment Screw and adjust the fan head
to the desired angle. Tighten the Tilt Adjustment Screw to fix the
position.
6