Kalorik WM 41684 Mode D'emploi page 6

Fax +1 305 430 9692
When baking is finished, unplug the cord from the socket and
•
leave the appliance open to cool.
ASSEMBLY AND REMOVAL OF PLATES
Hold the plate and line up the two rear locking pins (see Fig. 1) on
•
the back of the plate with the receptacles in the rear of the unit.
Gently lay the plate down and apply pressure to snap the plate
•
into place. You will hear a click indicating that the plate has
locked into place.
To ensure that the plate is locked, gently try to lift it up.
•
To remove the plate from the waffle maker, press the plate
•
release button and pull the plate away from the appliance.
Copies of the I/B. Please reproduce them without any
changes except under
International USA. The pages must be reproduced and folded
in order to obtain a booklet A5 (+/- 148.5 mm width x 210 mm
height). When folding, make sure you keep the good
numbering when you turn the pages of the I/B. Don't change
the page numbering. Keep the language integrity.
what is inside the frame.
6
Assembly page 6/32
special instruction from Team
Print only
WM 41684 - 120501