Publicité
Les langues disponibles
Les langues disponibles
Setup menus
AUDIO menu
Item
Superimposed
No.
display
770
CUE INSERT
771
AUDIO SLOW
772
AUTO MONI
773
PB AUDIO SEL
The underlining indicates the factory setting.
Setting
Superimposed
No.
display
This selects whether to record signals onto the cue track in the
audio insert mode
0000
OFF
0: No signals are recorded on the cue track, and the already
recorded signals are left on the track.
0001
ON
1: Signals are recorded on the cue track.
This selects the audio output mode during slow playback.
0000
PCM
0: PCM mode
PCM sound is output at speeds from –0.43a to +1a, and the
cue sound is output at all other speeds.
0001
CUE
1: CUE mode
PCM sound is output at the FWD 1a speed, and the cue sound
is output at all other speeds.
0002
A-CUE
2: ALL CUE mode
Cue sound is output at all speeds including the FWD 1a speed.
This selects the signal which is to be output to the speakers or
headphones.
0000
V1+V2
0: The signal complies with the AUDIO MONITOR SELECT switch
setting.
0001
AUTO
1: The signals of the VTR selected by the VTR1/VTR2 button are
output.
In the VTR1/VTR2 simultaneous operation mode, the VTR1
signals are output to the left channel and the VTR2 signals are
output to the right channel.
<Notes>
O The setting is fixed at V1+V2 when the OPERATION MODE
switch is set to SEPARATE.
O The setting is fixed at V1+V2 when the CONTROL switch is set
to REMOTE or EXT VTR.
This selects the playback tracks when the ANALOG AUDIO OUT
switch is set to "V1•V2."
(This setting takes effect in the 50 Mbps mode.)
0000
TR1/2
0: The sound recorded on tracks 1 and 2 is played back.
0001
TR3/4
1: The sound recorded on tracks 3 and 4 is played back.
49
Description of setting
V
V
T
T
R
R
1
2
[
[
[
[
[
[
Publicité
