Publicité
Les langues disponibles
Les langues disponibles
Use
1.
Using a suitable drill bit, drill through the bearing cage.
2.
Destroy the cage so that the balls in the bearing can be moved and there is enough
space for the required ball head.
3.
Repeat step two for the opposite side of the bearing.
4.
Select a suitable pair of ball heads, insert them into the bearing and rotate the ball
heads 90°.
Tip: If the correct size has been selected, do not allow the ball heads to
be pulled out of the bearing again.
5.
Screw the puller arms, the spindle and, if need be, the extensions onto the bridge.
6.
Now connect the puller arms to the ball heads.
7.
Once all parts of the puller have been fitted, gently pretension the spindle in a
clockwise direction.
8.
Check that all parts of the puller are securely in place.
9.
Now the bearing can be removed by turning the spindle clockwise.
Environmental protection
Prevention of environmental harm and preservation of the environment should
always be key concerns when it comes to waste disposal. Hence the importance of
ensuring clear separation of leftover materials to ensure proper recycling. Please
check local recycling measures with your local waste authority.
No liability can be accepted for printing errors, subject to change without notice.
Tel.: +49(0)9647 9287474 / Fax: +49(0)9647 92903-9399
Copyright
© ATP Autoteile GmbH, 2023
Am Heidweg 1
92690 Pressath
E-mail:
info@atp-autoteile.de
www.atp-autoteile.de
6
Publicité
