asalvo baby CHEF 15846 Guide D'usage page 13

All manuals and user guides at all-guides.com
5. FITTING THE SEAT COVER
Slide the pocket of the seat cover back onver the curved back frame. Secure the seat slides
by wrapping them around the frame and fastening plastic clips (a) at each side of the seat.
EN
6. FITTING THE TRAY
Position the tray to front of the arms, full the
front lever (a) found on the underside of the
tray, whilst sliding the tray along with the
slot (b) to the position required.
The tray has three positions only as indica-
ted on the arm rests, line the tray with the
desired position, release the levers to lock
position. In the case the tray is not automa-
tically locked onto the armrests, move the
tray slightly until a double click is heard sig-
naling the tray is securely locked.
WARNING: Never leave the tray fitting in a
position in which the warnings signs are vi-
sible.
The top tray can be removed by pulling at
the ridge (c) (d) and (e). To replace again,
position the top tray over the bottom tray
and push down to secure. The tray maybe
stored on the back legs of the highchair.
Align the holes in the rear of the tray with
the small pegs on the back legs.