How to Stop Inverter Operation
■To Stop the Hybrid Solar Inverter
Press and hold the [RUN/STOP] button on the Remote Controller for 5 seconds or more.
NOTE
•Standby power is consumed even while the inverter is stopped.
•Do not leave the grid-tied breaker in the Main Panel in the OFF position for long periods of time.
If the storage batteries have no charge and are not able to be recharged for two or more consecutive
days, the switch inside the storage battery unit automatically shuts off to prevent over-discharging.
Once the switch shuts off, servicing is required before the storage battery unit can be used again.
If the inverter needs to be shutdown for a long period of time or if the grid-tied breaker in the Main
Panel is in the OFF position for a long period of time, contact the vendor, an electrician, or the
customer service center.
■To Shutdown the System
To shut down the system before long absences or moves, servicing is required to turn OFF the switches inside
the inverter that control the PV system and storage battery unit. Contact the vendor, an electrician, or the
customer service center.
24